Aurora 90 - TX03 Cam Swap *KEEP YOUR OSD!* Other Awesome Upgrades And Flight! (BANGGOOD)

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
Aurora 90 - TX03 Cam Swap *KEEP YOUR OSD!* Other Awesome Upgrades And Flight! (BANGGOOD)
A few upgrades I made to my Eachine Aurora 90. I found these upgrades to be helpful and hope you do too! Enjoy!
If you enjoyed this please, consider a thumbs up and if you're new to the channel WELCOME! Please subscribe!
Thank you and Happy Flyin!
Get it here...Eachine Aurora 90mm:
DYS 2030 Props (make your own judgement on these):
Motor Spacers:
Eachine TX03:
Upgraded Batteries:
Features:
Extremely light and more powerful
STM32 F303MCU + BLHELI_S ESC make your Operating feel more stabilly and silky
Adjustable Angle of camera
Jaw-dropping flight performance
Cleanflight/Betaflight support
Acro mode / Air mode /Angle mode support
Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)
OSD Configuration has been include in BETAFLIGHT GUI
Radio Stick to control PID Tunes
BLHELI_S pass-through ready
Telemetry RSSI Output ready
Specifications:
Class: 90mm
Size: 118mm x 118mm x 70mm
Weight: 73g (battery not included)
Motor: Eachine 1104 7500KV brushless motor
ESC: 10A BLHELI_S 4 in 1 ESC Dshot600
Propeller: 50mm 4-blades propeller
Receiver: Spektrum DSM2/DSMX compatible
Camera: 600TVL HD CMOS 1/4 inch
VTX: 5.8g 25MW 48CH NTSC/PAL video transmitter
Flight Controller: Minicube Betaflight F3 6DOF w/built-in OSD
OSD: Betaflight OSD
Firmware: Betaflight 3.1
Flight time: 3-4minutes
Battery: 7.4V 450mah 80C lipo battery
Charger: B3PRO 2S balance charger
Minicube F3 6DOF flight controller:
Size: 27mm x 27mm x 5mm
Mount hole: 20mm x 20mm
Processor: STM32 F303 MCU
Sensor: SPI Sensor MPU6000
Built-in Betaflight OSD (Batt voltage, RSSI, Artificial Horizon, Fly mode, Flytime, Craft name etz.)
Firmware version: Betaflight 3.1 Dshot ready
Target: OmnibusF3
Minicube 10A BLHELI_S 4 in 1 ESC Dshot600:
Size: 27mm x 27mm x 5mm
Mount hole: 20mm x 20mm
Firmware version: BLHELI_S 16.5
Chip: BB2, 48MHZ Chip
Lipo Battery: 2-3S
Con. Current: 10A
Peak Current: 15A (10 seconds)
BEC: 5V @0.1A
Dshot600 ready: Yes (Default)
Protocols Supported: oneshot42 oneshot125 Multishot Dshot
Damped light: On
NOTE:
1. BNF receiver (intergrated buzzer) option:
Compatible Frsky SBUS receiver
Compatible Flysky 8CH AFHDS2A receiver
Compatible Specktrum DSM2/DSMX receiver
2. Compatible:
1). Frsky Receiver compatible with FRSKY ACCST, X9D(Plus)DJT/DFT/DHT
2). Flysky Receiver compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F.
3). DSM2/DSMX Receiver compatible wiht Satellite receiver.
3. Prevent interference
Please keep the receiver antenna away from VTX antenna to prevent interference.
Includes:
(1) Eachine Aurora 90 Frame kit
(1) Betaflight F3 6DOF flight controller build-in OSD
(1) Frsky/DSMX/Flysky AFHDS2A (optional)
(4) Eachine 1104 7500KV brushless motor
(1) Minicube 10A BLHELI_S 16.5 2-3S 4 in 1 ESC Dshot600
(4) 50mm 4-blades propeller CW
(4) 50mm 4-blades propeller CCW
(1) 600TVL HD CMOS 1/4 inch camera
(1) 5.8g 25MW 48CH NTSC/PAL VTX
(1) 7.4V 450mah 80C lipo battery
(1) B3PRO 2S balance charger
Please connect with me!
Facebook: /
Twitter:
Instagram: /
Patreon:
Music:
Great Days by Joakim Karud
Music provided by Audio Library
–––
• Contact the artist:
[email protected]
...
...
...